Metals Products & Services

1 - 30 of 1021 products

Sheet and Plate

Generally speaking, a sheet is a thinner item of metal that has been cut from a continuously rolled coil. As such, it can be less than 1mm, or up to 25mm,…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Round Rods

A36 Steel Round Bar is a hot rolled, mild steel solid steel bar that is ideal for all general fabrication, manufacturing and repairs. Common applications of aluminum round bar include supports, trim, shaft,…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Square and Rectangular Tubes

Obviously this depends on the relative size of the sections. Assuming that the rectangular section's smallest dimension is equal to (or greater than) the square section's side and their thicknesses…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Round Tubes and Pipes

Tubes can come in different shapes such as square, rectangular and cylindrical, whereas piping is always round. The circular shape of the pipe makes the pressure force evenly distributed. Pipes accommodate…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Titanium

Titanium – Aerospace Applications Titanium is used in engine applications such as rotors, compressor blades, hydraulic system components and nacelles. Titanium 6AL-4V alloy accounts for almost 50% of all alloys…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Copper-Nickel

C71500 - (70-30) Copper-Nickel C71500 - (70-30) Copper-Nickel is preferred to 90-10 Copper-Nickel where corrosion and temperature conditions are more severe. C70600 - (90-10) Copper-Nickel C70600 - (90-10) Copper-Nickel is…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Copper

ETP (Electro Tough Pitch) Copper ETP (Electro Tough Pitch Copper) is cast from the highest purity copper cathode available grade. Copper bar is used in various electrical applications and requires…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Carbon Steel

Carbon steel, also called plain-carbon steel, is a metal alloy, a combination of two elements, iron and carbon, where other elements are present in quantities too small to affect the…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Bronze

Bearing Bronze Bearing Bronze Alloys are general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability. Bearing Bronze Alloys are for general utility…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Free Cutting Brass

Free Cutting Brass Also known as free-machining brass is extremely well suited for high speed machining. C36000 alloy is rated 100 and is the standard by which all other copper…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Armor and Ballistic Plate

Armor & Ballistic Steel Plate is designed for a wide variety of military specifications and structural uses that require armor steel plate approved by all US departments and agencies for…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Stainless Steel Round Rods

Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Stainless Steel Square and Rectangular Tubes

Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Stainless Steel Round Tubes and Pipes

Type 2169 (21-6-9) stainless aerospace tubing is a high manganese nitrogen strengthened, austenitic stainless steel with high strength in the annealed condition, excellent resistance to oxidation at high temperatures ,…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Stainless Steel Polished Tubes

Type 316/316L is a chromium nickel austenitic stainless steel containing molybdenum. The molybdenum addition enhances the corrosion resistance over that of 304/304L in halide environments as well as in reducing…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Stainless Steel Sheets and Plate

Type 301 is an austenitic chromium-nickel stainless steel. This alloy is non- magnetic in the annealed condition, but becomes magnetic when cold worked. High strength and excellent corrosion resistance make…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

5083 Marine Grade Aluminum Alloy

5083 aluminium alloy is an aluminium alloy with magnesium and traces of manganese and chromium. It is highly resistant to attack by seawater and industrial chemicals. Alloy 5083 retains exceptional strength after welding. It has the…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

5052 Alloy Aluminum

5052 is an aluminium alloy, primarily alloyed with magnesium and chromium. 5052 aluminum is frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

3003 Alloy Aluminum

3003 aluminium alloy is an alloy in the wrought aluminium-manganese family. It can be cold worked to produce tempers with a higher strength but a lower ductility. Like most other…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

1100 Alloy Aluminum

1100 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). With a minimum of 99.0% aluminium, it is the most heavily alloyed of the…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

535 Cast Aluminum

535 is a cast aluminum alloy consisting of 0.15% silicon, 0.003 to 0.007% beryllium, 0.5% iron, 0.15% copper, 6.5 to 7.5% magnesium, 0.25% titanium, 0.15% zinc, 0.35% manganese, and less…

ADI Metal

2930 SW 2nd Ave., Fort Lauderdale, FL 33315

866.825.9271, 954.523.6474

Products

Machining

Ferralloy, Inc. recognizes that, as a value added service, machining in most cases, is required to transform raw material into a finished component. By adding value to this raw material…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Metals & Alloys

With our history in the metalworking industry dating back to 1984, Ferralloy, Inc. has the infrastructure and facilities to supply raw material in numerous grades and forms. We offer sheet,…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Fabrications

At Ferralloy, Inc., we have the resources to supply you with high-quality rod and wire as well as sheet and plate fabrications. In addition to rolling, bending, and drilling, our…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Closed Die / Open Die Forgings

Ferralloy, Inc. is a major supplier of the open die and closed die forgings to a global customer base. We have the ability to provide custom components as -forged, rough…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Rolled Ring Forgings

Utilization of the Rolled Ring Forging Process reduces costs typically seen with plate burnouts and other process options. We supply rolled ring forgings in diameters up to 110” from carbon,…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Forgings

Open Die, Closed Die, Cold Headed or Rolled Ring Processes are offered for your specific forging requirements!Ferralloy Inc. is a leading global provider of forgings to major companies across all…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Heat Resistant Castings

If your project requires parts that function in high-temperature service conditions above 1,200ºF (670ºC), under load and, in particular, gas environments, we have the technical authority to assist you with…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Centrifugal Castings

As part of our comprehensive range of casting capabilities, Ferralloy, Inc., offers centrifugal casting for parts cylindrical in shape. Our centrifugal casting line enables us to provide components with exceptional…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products

Sand Castings

At Ferralloy, Inc., we offer sand casting as a low-cost method for producing both small and large parts from a wide variety of ferrous and non-ferrous alloys. The sand casting…

Ferralloy Incorporated

28001 Ranney Parkway, Cleveland, OH 44145

440.250.1900

Products