Gages Products & Services

1 - 30 of 133 products

Strain Gauges

We manufacture electrical resistance strain gauges to precision tolerances to increase the long-term stability and reliability of load cells. Our research and development engineers develop complete solutions with aggressive pricing.

Transcell Tech

975 Deerfield Parkway Buffalo Grove, IL., 60089

+1-847-419-9180

Products

OPTI-SCOPE

Shows magnified full 360° inside view of holes Allows instant detection of potentially costly drilling imperfections, spiraling, roughness, and burring Facilitates checking of PCB holes for plating voids, smoothness and…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

FLEXIFILE

A superior steel file which can be bent by hand to conform to your workpiece. Can be bent over 100 times. 66 Rockwell "C" surface hardness. 6-1/4" overall length.

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

SURFACE CENTERS

The BARCOR SURFACE CENTERS is an ultra-precision, multi-position Bench Center designed specifically for Vertical as well as Horizontal use on your existing Surface Plate, CMM or Inspection Bench. 28 Standard…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

BEVEL GAGE

Accuracy GUARANTEED to be within ± .001" throughout entire range. Instantly read the width of chamfers and bevels on straight AND circular edges... direct to .001" Because the gage operates…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

RIVET GAGE

Measure the height (or depth) of rivet and screw heads and the flushness of welds; direct to .0005"... instantly and with great accuracy. Easily maintain Mil Spec riveting standards of…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

HOLE GAGE

The BARCOR HOLE GAGE is a precision instrument designed to instantly give you a diameter reading in less than two seconds. Merely insert the precision ground, hardened tool steel Gaging…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

COUNTERSINK GAGE

The BARCOR COUNTERSINK GAGE is a precision instrument designed specifically to measure the top (major) countersink diameter. Merely press the spring loaded, exact angle Gaging Plunger into the countersink and…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

ELECTRONIC CHAMFER GAGE

The BARCOR Electronic CHAMFER GAGE is a precision instrument designed specifically to measure the top diameter of chamfers, countersinks, center drills, or tapered holes. Simply press the Electronic CHAMFER GAGE’s…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

CHAMFER GAGE

The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. Merely press the spring loaded,…

Barcor Gages Inc

1413 Aitken Drive, Deerfield, Il 60015, U.S.A.

847-940-0750

Products

Pressure Gauges

Pressure gauges measure gas and liquid pressure and are available in analog and digital styles. These gauges are typically used in pressure and vacuum applications, including testing, laboratory, process control,…

Dial Indicating Gauges and more...

Branom Instrument Co

5610 4th Ave. So. Seattle, Washington 98108

+1 206-762-6050

Products

Level Gauge

ARCHON Industries manufactures a large selection of liquid level gauges including armored style flat glass reflex & transparent gauges, large chamber level gauges, tubular glass level gauges, magnetic level gauges,…

Armored Level Gauge and more...

Archon Industries

357 Spook Rock Road Suffern, NY 10901

(845)368-3600

Products

Vacuum Gauge Controllers

MKS offers a range of controllers that control ion gauges, heat-loss sensors, and thermocouples. Product features can be configured to meet your specific process needs. A variety of communication protocols,…

475 Convectron® Vacuum Gauge Controller and more...

MKS Instruments

2 Tech Drive Suite 201 Andover, MA 01810

+1 978-645-5500

Products

Gage Blocks

Choose from a complete range of globally recognized Starrett-Webber gage blocks includes: High-grade steel gage blocks for shop floor use, longer-lasting and non-corroding ceramic blocks. Top-of-the-line croblox® Chromium Carbide, are…

Starrett

121 Crescent Street Athol, MA 01331-1915

(978) 249-3551

Products

Pipe Straightness Gages

Gagemaker manufactures gaging equipment for the inspection of tubular goods (the pipes) before or after they are threaded. Many are listed below, but we also offer custom and non-stock/special items.

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

Pin Seal Diameter Gages

The Pin Seal Diameter Series of gages inspect critical pin seal diameters and seal tapers on premium connections. With the addition of stand-off plates, the gages also inspect seal tapers.…

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

Lead Gages

Thread Lead is probably one of the most important thread elements if not the most important in the thread cutting industry.  Lead error (which often leads to standoff error on tapered threads)…

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

Functional Size Gages

Functional gauging takes into account the cumulative effects of diameter, lead, taper, flank angle and form error. Experience the same functionality of ring and plugs with the added benefit of…

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

Buttress Runout Gages

Thread runout is the measurement of the abruptness with which the buttress thread is terminated at the triangle end of the thread. A rapid pull-out of the cutting tool results…

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

API 6A Seal Ring Groove Gages

A ring groove is basically a closely dimensioned groove cut into the face of a pipe flange. Together with a gasket, a groove helps create a seal between parts, so…

Gagemaker

712 E. Southmore Avenue Pasadena, TX 77502

713-472-7360

Products

Retractable Pin Gages

Adjustable inside diameter pin gages are used to check straight bores, grooves, spherical radii, and spline and gear pitch diameters. A variety of interchangeable threaded contacts allows the gage to…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Midget Reed Gages

This economical, heavy duty production gage features a rigid steel plate frame and our bullet proof reed spring gaging transfer. The LDAR mechanism is impervious to coolants, dirt and contaminants…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

MDG Series Depth Gages

The MDG series of modular indicating depth gages are available as fixed or adjustable models. This versatile design allows the mixing and matching of components to build a gage which…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Bearing Radial Play Gage

The S-3 comparator stand anvil can be replaced with a radial play fixture and accessories to check the internal clearance of miniature bearings. Miniature bearing radial play fixture, part #…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Countersink & Chamfer Gages

Dorsey Metrology countersink and chamfer gages offer fast, accurate measurement of the top diameter of tapered holes, countersinks, chamfers center drill holes, valve seats, etc. and are used for inspection…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Bench Gages

The BG Direct bench gage utilizes various models of a dial or digital indicators. The indicator is protected from damage as it is enclosed beneath the gage itself. The bench…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Thickness Gages

Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers and clockwise continuous dial indicators. Special frames,…

Dorsey Gage Company

53 Oakley St Poughkeepsie, NY, 12601

+1-845-454-3111

Products

Thread gage

Precision Gage is well versed in the use of functional thread gaging as well as variable thread gaging. The Tri-Roll and ITC thread comparators are very useful tools for measuring…

Precision Gage Co

100 Shore Drive Burr Ridge, IL 60527

(630) 655-2121

Products

Height gages

Height gages are precise tools for measuring the distance from any surface, either on the part or from a surface plate. The technology of digital height gages today even allows…

Precision Gage Co

100 Shore Drive Burr Ridge, IL 60527

(630) 655-2121

Products

Air gages

High-precision manufacturing requires unique measurement solutions. First developed during the second World War, air gaging is an unparalleled, ultra-precise measurement technology. It is popular among precision manufactures because it is…

Precision Gage Co

100 Shore Drive Burr Ridge, IL 60527

(630) 655-2121

Products